Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!bu.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!rutgers!faatcrl!jprad
From: jprad@faatcrl.UUCP (Jack Radigan)
Newsgroups: comp.sys.amiga.datacomm
Subject: Re: Jr. COMM moved message from c.s.a.emulations
Keywords: Move'd
Message-ID: <705@faatcrl.UUCP>
Date: 17 Jan 91 00:23:19 GMT
References: <16215@chopin.udel.edu>
Organization: FAA Technical Center, Atlantic City NJ
Lines: 23

jeremym@chopin.udel.edu (Jeremy A Moskowitz) writes:

>This letter was inadvertantly sent to c.s.a.emulations...
>here it is for correct threading...
> 

>I have an Amiga 3000 with AE's Datalink 2000 internal modem with MNP-5.  As
>I load up JRComm with its "serial.device" replaced with "dl2000.device", the p

>* The macros spew garbage that looks like a decoded version of the original
>    macros.

>* Trying to enable CTS/RTS causes an ERROR.

>* When using the Directory to dial, the message says,"Modem error, exiting.."
>  or it tries to dial without lifting the reciever.  Can anyone help me?

  I've been in contact with Applied Engineering and they have assured me that
the buffering problem that they had with the serial.driver for that modem
has been fixed.  Anyone having problems with the Datalink 2000 should contact
AE directly for an update.

  -jack-