Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!usc!julius.cs.uiuc.edu!wuarchive!uunet!pmafire!mica.inel.gov!ws-hps!hps
From: hps@ws-hps.INEL.GOV (Randall M. Heaps)
Newsgroups: comp.sys.amiga.tech
Subject: Redirecting printer to a file.
Message-ID: <1991Jan17.163218.10885@inel.gov>
Date: 17 Jan 91 16:32:18 GMT
Sender: news@inel.gov
Reply-To: hps@ws-hps.INEL.GOV (Randall M. Heaps)
Organization: Idaho National Engineering Laboratory, Idaho Falls, Idaho
Lines: 21
Keywords:printing, file

I am interested in being able to capture the printer port and redirect
it to a file.  In other words make the info going to the printer be
saved in a file instead.  Are there and utils for this, or is there a
simple Prefs or AmigaDOS command that I missed along the way?  Any hints
or tips would be greatly appreciated.
Thanks, 
Randy Heaps (email at hps@inel.gov)


========== long legal disclaimer follows, press n to skip ===========

Neither the United States Government or the Idaho National Engineering
Laboratory or any of their employees, makes any warranty, whatsoever,
implied, or assumes any legal liability or responsibility regarding any
information, disclosed, or represents that its use would not infringe
privately owned rights.  No specific reference constitutes or implies
endorsement, recommendation, or favoring by the United States
Government or the Idaho National Engineering Laboratory.  The views and
opinions expressed herein do not necessarily reflect those of the
United States Government or the Idaho National Engineering Laboratory,
and shall not be used for advertising or product endorsement purposes.