Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu
From: lshaw@ccwf.cc.utexas.edu (logan shaw)
Newsgroups: comp.sys.amiga.tech
Subject: Re: NEC Multisync 4D and Amiga
Message-ID: <42907@ut-emx.uucp>
Date: 22 Jan 91 05:23:21 GMT
References: <91021.165126L33QC@CUNYVM.BITNET>
Sender: news@ut-emx.uucp
Reply-To: lshaw@ccwf.cc.utexas.edu (logan shaw)
Organization: The University of Texas at Austin
Lines: 19

In article <91021.165126L33QC@CUNYVM.BITNET> L33QC@CUNYVM.BITNET writes:
>I just bought a NEC Multisync 4D monitor, and it's supposed to have a
>resolution of 1024 x 768. However, by adjusting the system-configuration,
>the most I have been able to get is about 704 x 474... Does anyone out there
>know how I can make the Amiga utilize the full resolution of the monitor?

Buy a ULowell board.  The monitor has a _maximum_ resolution of 1024x768,
but that doesn't mean am stock amiga can generate that.

Alternatively, if you have 2.0, a super Agnus, and a super Denise, you
should be able to get about 1280x600.  (PAL, super-hires overscan).
Of course, that would only be in 4 colors...

>Any help appreciated... Thanks...
-- 
=----------------Logan-Shaw---(lshaw@ccwf.cc.utexas.edu)----------------=
  "Trust in the Lord with all thine heart, and lean not on thine own
   understanding.  In all thy ways acknowledge Him and he shall direct
   thy paths"        - Proverbs 3:5-6