Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!tut.cis.ohio-state.edu!ucbvax!agate!darkstar!ucscb.UCSC.EDU!unknown
From: unknown@ucscb.UCSC.EDU (The Unknown User)
Newsgroups: comp.sys.apple2
Subject: Re: ProTerm bashing
Message-ID: <11303@darkstar.ucsc.edu>
Date: 19 Jan 91 23:37:23 GMT
References: <7616@plains.NoDak.edu> <1991Jan19.194218.17939@hoss.unl.edu>
Sender: usenet@darkstar.ucsc.edu
Organization: University of California, Santa Cruz; Open Access Computing
Lines: 21


In article <1991Jan19.194218.17939@hoss.unl.edu> greg@hoss.unl.edu (Lig Lury Jr.) writes:
>I've never had problems with losing characters from ProTERM.  Lines yes,
>characters no.  Line loss tends to occur when I am online with no top bar,
>accessing scrollback.  Another major annoyance is doing an ASCII Send
>without the top bar.  It likes to recreate that bar for each line sent,
>leaving a track of inversed characters in my scrollback, and then
>restoring the wrong line in place of the insistent top bar.  That is a
>definite bug.

	The inverse line problem no longer exists in 2.2...

	You talk about losing lies when online with no top bar and 
accessing scrollback..

	So you mean you're losing INCOMING data?? If so, -of course-
you're going to lose some data as you're in scrollback and Proterm's not
accessing the serial port!
-- 
/Apple II(GS) Forever! unknown@ucscb.ucsc.edu MAIL ME FOR INFO ABOUT CHEAP CDs\
\WRITE TO ORIGIN ABOUT ULTIMA VI //e and IIGS! Mail me for addresses, & info. /