Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!zephyr.ens.tek.com!tektronix!reed!glacier!busker!f1.n354.z1.FIDONET.ORG!MARK.HOLLINGSWORTH
From: MARK.HOLLINGSWORTH@f1.n354.z1.FIDONET.ORG (MARK HOLLINGSWORTH)
Newsgroups: comp.sys.mac.hardware
Subject: Re: Dilemma: Should I do it myself?
Message-ID: <35.27964B97@busker.fidonet.org>
Date: 17 Jan 91 02:06:59 GMT
Sender: ufgate@busker.fidonet.org (newsout1.26)
Organization: FidoNet node 1:354/1 - Evergreen Micro Net, Port Angeles WA
Lines: 19

>>It is my understanding that you have to cut a resistor on the mother
board when you do a memory upgrade, so that the Mac knows how much
memory you have.  Therefore, when you remove the memory that you
installed, you will have to solder the resistor back for the machine to
be operational with the smaller amount of memory again.  I'm afraid that
this would be to obvious to get past the service people.
 
Sorry...nice try, though.
<<<
 On the SE/30, you don't have to cut anything. Just move the  256 simms
into the other bank, and drop in the 1 meg simms.
 
-->  Lininger Utilities Distribution Site<--
 

--  
MARK HOLLINGSWORTH - via FidoNet node 1:105/14
    UUCP: ...!{uunet!glacier, ..reed.bitnet}!busker!354!1!MARK.HOLLINGSWORTH
INTERNET: MARK.HOLLINGSWORTH@f1.n354.z1.FIDONET.ORG