Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!mips!redwood.mips.com
From: wje@redwood.mips.com (William J. Earl)
Newsgroups: comp.sys.mips
Subject: Re: uugetty and /usr/spool/locks (another try)
Message-ID: <45028@mips.mips.COM>
Date: 18 Jan 91 18:55:09 GMT
References: <9101162234.AA07103@fernwood.mpk.ca.us>
Sender: news@mips.COM
Reply-To: wje@redwood.mips.com (William J. Earl)
Organization: MIPS Computer Systems Inc.
Lines: 15
In-reply-to: jns@fernwood.mpk.ca.US (Jerry Sweet)

In article <9101162234.AA07103@fernwood.mpk.ca.us>, jns@fernwood (Jerry Sweet) writes:
>...
> George Hartzell asked if there was a problem because of tip vs. cu.
> The answer is probably not, partly because tip and cu are linked
> together---they're the same program---and partly because some progress
> has been made, although it's not entirely satisfactory progress.

     There are actually two cu programs.  /bsd43/bin/cu is just a link
to /bsd43/bin/tip, and is of course compatible with 4.3 BSD cu.  /usr/bin/cu
is a completely different program, and is the SVR3 cu.
-- 
	William J. Earl			wje@mips.com
	MIPS Computer Systems		408-524-8172
	930 Arques Avenue, M/S 1-03	FAX 408-524-8401
	Sunnyvale, CA 94086-3650