Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!uwm.edu!zaphod.mps.ohio-state.edu!julius.cs.uiuc.edu!news.cs.indiana.edu!noose.ecn.purdue.edu!mentor.cc.purdue.edu!mace.cc.purdue.edu!abe
From: abe@mace.cc.purdue.edu (Vic Abell)
Newsgroups: comp.sys.next
Subject: Re: Drive parameters for Fujitsu M2263SA
Message-ID: <6621@mace.cc.purdue.edu>
Date: 18 Jan 91 16:01:11 GMT
References: <1991Jan18.065527.28368@agate.berkeley.edu>
Reply-To: abe@mace.cc.purdue.edu (Vic Abell)
Distribution: usa
Organization: Purdue University
Lines: 20

In article <1991Jan18.065527.28368@agate.berkeley.edu> jeff@soda.Berkeley.EDU (Jeff Louie) writes:
>
>Has anyone gotten a Fujitsu M2263SA (a 778MB drive) configured to boot off
>of the Next?  I have been able to get it formatted and 'built', but for
>some reason when I attempt to boot off using the drive, ROM Monitor
>comes back with the following error:
>
>	sc: unexpected msg
>	SCSI: Unexpected Msg:1

I've replied to Jeff directly, but it's probably worth re-broadcasting
that there is an excellent digest available via anonymous ftp from
sonata.cc.purdue.edu (128.210.15.30) that discusses installing third
party disks.  The articles in

	pub/next/lore/disks.Z

directly address the jumper settings that are required on a Fujitsu
M2263S to solve the above problem.  I found that the same jumper settings
were needed to enable a Fujitsu M2266S.