Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!bronze!mckimg@bronze.ucs.indiana.edu
From: mckimg@bronze.ucs.indiana.edu (Geoffrey McKim)
Newsgroups: comp.sys.novell
Subject: (none)
Message-ID: <1991Jan17.201641.15736@bronze.ucs.indiana.edu>
Date: 17 Jan 91 20:16:41 GMT
Sender: mckimg@bronze.ucs.indiana.edu (Geoffrey McKim)
Organization: Indiana University
Lines: 34

Has anybody else had a similar problem to what we are having?

A preliminary conclusion that I have reached is that the Macintosh 
Printing VAP's released with MacVAP's 2.0 do not work properly with the
new "3C505 with AT/1 (v4.11)" driver distributed on the LAN_DRV_180 with MacVAP's 
2.0.

We have had:

	1. no problems running the 4.11 3C505 driver with the file service
	VAP's only.
	2. no problems running the old "3C505 (Assy 2012) with Appletalk"
	driver with full MacVAP 2.0 print and file services
	
The symptom is that the server merely hangs -- no ABEND, no chance to go 
into the Novell debugger, etc.  A simple unrecoverable hang.  I have also 
tried this with several machines (although all of the same type).  The 
hardware we are using is:  

		Empac 386
		Adaptech SCSI controller
		3C505 (2012) Ethernet board

If anyone else has seen symptoms similar to this, I would be greatly 
appreciative in hearing about it.

Thanks in advance!

=========================================================================
Geoffrey W. McKim			Internet: mckimg@ucs.indiana.edu
UCS Networks/LAN Group			BITNET: mckimg@iuamber
Indiana University Bloomington
855-4643
=========================================================================