Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!casbah.acns.nwu.edu!accuvax.nwu.edu!midway!chsun1!kusumoto From: kusumoto@chsun1.uchicago.edu (Bob Kusumoto) Newsgroups: comp.sys.novell Subject: Re: windows 3.0 and novell conflict Message-ID: Date: 20 Jan 91 03:47:30 GMT References: <17737@brahms.udel.edu> <1991Jan18.034016.7812@eecs.wsu.edu> Sender: news@midway.uchicago.edu (News Administrator) Distribution: usa Organization: University of Chicago Lines: 35 ckinsman@eecs.wsu.edu (Chris Kinsman - EE major) writes: >In article <17737@brahms.udel.edu> jarom@brahms.udel.edu (Carol Jarom) writes: >>Packet Driver 3COM 3c501, ver 7.2, IPX v3.01 Rev. A(windows release), >>and Netware v3.01 Rev A XMS Workstation shell(windows release). We are >>running Novell Netware SFT 286 2.15 Rev.c. >Netware shells have been through 5 revs since then. You might want to try and >acquire 3.01E shells. The latest shells are: IPX: v3.01 Rev B NETx: v3.01 Rev E NETBIOS: v3.01 Rev C on rodan.acs.syr.edu (via anonymous ftp). You also have to make sure you're using the BYU shells to run the IPX over the packet driver (did you remember to do this?). beyond this, I would make sure that your windows ini files are up to par by making sure that the proper parameters are given to it. (I also heard that you need to add a line in the SHELL.CFG file for the IPX shell: SHOW DOT=ON or something to that effect so that windows can see the . and .. entries, someone confirm this for me.) Bob -- Bob Kusumoto | Find the electric messiah! Internet: kusumoto@chsun1.uchicago.edu | The AC/DC God! Bitnet: kusumoto@chsun1.uchicago.bitnet | - My Life with the Thrill Kill UUCP: ...!{oddjob,gargoyle}!chsun1!kusumoto | Kult, "Kooler than Jesus"