Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!mcsun!unido!fauern!lan!roell
From: roell@informatik.tu-muenchen.dbp.de (Thomas Roell)
Newsgroups: comp.unix.sysv386
Subject: Re: Roell's server gives "Cannot establish any listening sockets"
Message-ID: <6548@tuminfo1.lan.informatik.tu-muenchen.dbp.de>
Date: 14 Jan 91 10:49:13 GMT
References: <1991Jan13.235852.8887@bronze.ucs.indiana.edu>
Sender: news@lan.informatik.tu-muenchen.dbp.de
Organization: Inst. fuer Informatik, Technische Univ. Muenchen, West Germany
Lines: 30
In-reply-to: mitchemt@silver.ucs.indiana.edu's message of 13 Jan 91 23:58:52 GMT

Just read the docs that come with X386 (/usr/lib/X11/config/X386/Install):

...........


o  you MUST have installed the STREAMS facility before you can use X11

o  if you start X11 form the console - vt, there MUST be a free /dev/vt??

o  check up that you have specified "SHLIBMAX 8" in /etc/conf/cf.d/stune.
   (if not, this requires rebuilding the kernel)

o  if you use xdm, xrdb or imake, you MUST have a /lib/cpp installed.

o  imake may give you the warning "bad include syntax". This can be ignored.

o  VPIX will only run with a version of X11R4 that support TCP/IP.

o  you can only use 7bit chars with xterm when running not with TCP/IP.

..........

I think topic No.1 should fix your problem.

- Thomas
--
_______________________________________________________________________________
E-Mail (domain):	 roell@lan.informatik.tu-muenchen.de
UUCP (if above fails):   roell@tumult.{uucp | informatik.tu-muenchen.de}
famous last words: "diskspace - the final frontier..."