Xref: utzoo comp.unix.xenix.sco:1435 comp.unix.sysv386:4211 Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!bu.edu!xylogics!samsung!umich!vela!srodawa From: srodawa@vela.acs.oakland.edu (Ron Srodawa) Newsgroups: comp.unix.xenix.sco,comp.unix.sysv386 Subject: Multi-volume diskette files MSDOS->Xenix/386 Message-ID: <4779@vela.acs.oakland.edu> Date: 22 Jan 91 04:03:08 GMT Reply-To: srodawa@vela.acs.oakland.edu (Ron Srodawa) Organization: Oakland University, Rochester MI Lines: 31 A week ago I mentioned I was exploring using PAX2.0 (tar.exe) to move large files between MSDOS and Xenix/386. Several asked for a report. Here goes. 1. PAX2.0 for MS-DOS is available from Simtel20 and several other archive sites. I got mine from wuarchive.wustl.edu which is a mirror of simtel20. There is a unix source supposedly on uunet.uu.net, but I haven't gotten that. 2. I wrote a small tar file (single 360k volume) on MSDOS and ported it to Xenix 2.3.2 (386). No problem. 3. I wrote a 6 volume (1440K per volume) on MSDOS and ported that to Xenix/386 2.3.2. Initial attempts did not succeed. Xenix tar would complain of a directory checksum error at the end of the first volume and never ask for succeeding volumes. Finally, I moved all six volumes to Xenix files using dd, then I built a single file with cat. Xenix tar accepted this with no problem. -- I don't know why Xenix fails to accept a multi-volume tar file. I plan to try to write one with Xenix just to be sure it can read its own. Obviously the data is correct, since constructing a single file with cat yields a tar file which can be processed. --- One solution would be to build PAX2.0 on Xenix and use that instead of Xenix tar. Presumably pax can read its own output. --- A second solution might be to tru gnu tar. That too should be able to be used both on Xenix and MSDOS. Ron. -- | Ronald J. Srodawa | Internet: srodawa@unix.secs.oakland.edu | | School of Engineering and CS | UUCP: srodawa@egrunix.UUCP | | Oakland University | Voice: (313) 370-2247 | | Rochester, Michigan 48309-4401 | |