Path: utzoo!utgpu!cunews!bnrgate!bwdls61.bnr.ca!bwdls58!bwdlh490!hwt
From: hwt@bwdlh490.BNR.CA (Henry Troup)
Newsgroups: comp.lang.postscript
Subject: Re: look for model file for Postscript
Message-ID: <5483@bwdls58.UUCP>
Date: 29 Jan 91 03:12:06 GMT
References: <9101281928.AA16164@decpa.pa.dec.com>
Sender: news@bwdls58.UUCP
Reply-To: hwt@bwdlh490.BNR.CA (Henry Troup)
Distribution: world
Organization: Bell-Northern Research Ltd.
Lines: 16

In article <9101281928.AA16164@decpa.pa.dec.com>, paine@fungus.dec.com
(Willy Paine) writes:

|>I turn on PS on and even with dumb model lp, printer does not get
|>Adobe PostScript header.   I mean this printer will not print under

My experience, under HP-UX, was that the 'dumb' model was not dumb enough --
it tried to write a banner first.  I created a 'postscript' model by 
removing every echo(1) in the 'dumb' model.  Try this for yourself.

Copyright restrictions, plus a bunch of portability qualms, make me very
reluctant to post or email my model file.
                    
Henry Troup - BNR owns but does not share my opinions | The .signature is the
P.O. Box 3511, Stn. C. Ottawa, Ontario, Canada K1Y 4H7| lowest form of humour
uunet!bnrgate!hwt%bwdlh490 HWT@BNR.CA +1 613-765-2337 |