Path: utzoo!attcan!uunet!bonnie.concordia.ca!IRO.UMontreal.CA!matrox!altitude!Speedy.CAM.ORG!Sylvain From: Sylvain@Speedy.CAM.ORG (Sylvain Tremblay) Newsgroups: comp.sys.amiga Subject: Re: DigiView on A3000?! Message-ID: Date: 12 Jan 91 03:11:13 GMT References: <187d8424.ARN03c4@icoast.UUCP> Lines: 24 >In article <187d8424.ARN03c4@icoast.UUCP> hbrinch@icoast.UUCP (Henrik Brinch) writes: >I have some problems using my DigiView with my A3000-25-100 (36.303/36.102), >it keeps saying : No video-signal present! I have a little clue, >I've bought a gender-change for quite some time ago (because I originally >bought it for an A1000). The Gender-Change is not from NewTek, but I've >heard some rumors saying that the gc from NewTek is the only one which >works? Anybody with the same problems (I must add I've never before >had these problems neither on my A1000 or A2000!!!!!). I have an A2000 and I bought NewTek's DigiView AND their gender changer. The reason why the gender changer of NewTek is the only one to work with DigiView is because it is not ONLY a gc, it also change the pinout. The power signals have been changed from the first Amy to the others. I am surprised that your standard gc worked with the A2000, theoricaly it souldn't. Try the one from NewTek, it's your best bet. -- Sylvain __ +-----------------------------------------------------------------///------+ | Sylvain Tremblay INTERNET: Sylvain@Speedy.CAM.ORG __ /// /| | | Montreal, Qc, Canada CIS: 71640,666 \\\/// # | | | (514) 256-2311 or: 71640.666@compuserve.com \XX/ _|_ | +--------------------------------------------------------------------------+