Path: utzoo!utgpu!cunews!micor!latour!atronx!rwm
From: rwm@atronx.OCUnix.On.Ca (Russell McOrmond)
Newsgroups: comp.sys.amiga.advocacy
Subject: Re: A3500 ??
Message-ID: <58264.664860960@atronx.OCUnix.On.Ca>
Date: Fri Jan 25 21:36:00 1991
Followup-To: comp.sys.amiga.advocacy
In-Reply-To: daveh@cbmvax.commodore.com (Dave Haynie)

In a message posted on 22 Jan 91 18:43:43 GMT,
daveh@cbmvax.commodore.com (Dave Haynie) wrote:
DH>>Not that that's really an issue now.  I have heard that 
DH>>Toaster's in the A3000 (hanging out the back...)  
DH>
DH>It would hang out the front, and you might have to chop a little A3000 case to 
DH>fit all the connectors in the back.

It does not hang out at all - It is no length problem at all (My theory is that
this was a roomer started by newtek to avoid people trying to put Toasters
in A3000's and finding the OTHER problems).  The only Physical problem is one of the
first Video Input being 'HIGHER' (Well, more towards the side of the machine in
the A3000) than there is space for.  If one 'Cuts' a bit out of the casing, all will
fit quite easily.

   *** Thus VOIDING any warranty on the Machine ***

Which is why it is not done (Unless you are willing to take FULL responsibility
for the machine).

  There are a few minor electrical and timing problems, but this isn't the place
for this.  Suffice to say that this HAS been done to a few machines by myself,
and it works quite well.

---
  Opinions expressed in this message are my Own. I represent nobody else.
  Russell McOrmond   rwm@Atronx.OCUnix.On.Ca   {tigris,alzabo,...}!atronx!rwm 
  FidoNet 1:163/109  Net Support: (613) 230-2282
  Amiga-Fidonet Support  1:1/109       Gateway for .Amiga.OCUnix.On.Ca