Path: utzoo!mnetor!tmsoft!torsqnt!hybrid!scifi!bywater!uunet!halluc!Eric.Fleischer
From: Eric.Fleischer@halluc.FIDONET.ORG (Eric Fleischer)
Newsgroups: comp.sys.amiga.hardware
Subject: Alegra ram board a1000  h
Message-ID: <32.27A32D55@halluc.FIDONET.ORG>
Date: 27 Jan 91 14:57:00 GMT
Organization: The Hallucination BBS, Fairfax VA (703) 425-5824
Lines: 19

-> I have an ALegra RAM board that I bought used from a friend. It has
-> 512k and is supposedly upgradable to 2 MB's with 1m x 1 drams(which I
-> have).
-> The board is made by Access Associates, and is for the A1000.
-> The problem I have is that it won't recognize the RAM when I put the
-> 2mb's in it. And since there is no jumper to change the config of the
-> board, It only recognizes the first 512k of the 2MB's.

   You need to change two PALs in the unit to get it to recognize the 2 
megs of RAM. Findig the PALs may be difficult, since they have not been 
made for years. I got my set (about 3 years ago) from Abel's. You never 
know, they may have a set in a dusty corner.

   <ELF>

--  
Eric Fleischer - via FidoNet node 1:109/345
UUCP: ...!uunet!halluc!Eric.Fleischer
INTERNET: Eric.Fleischer@halluc.FIDONET.ORG