Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!helios!tamuts!n368bq
From: n368bq@tamuts.tamu.edu (Raoul Rodriguez)
Newsgroups: comp.sys.amiga.hardware
Subject: How to make your 500 keyboard detachable!!
Message-ID: <11586@helios.TAMU.EDU>
Date: 29 Jan 91 13:57:48 GMT
Sender: usenet@helios.TAMU.EDU
Organization: Texas A&M University
Lines: 13


 am not sure that the first time I posted this it went onto the net,
but I recently made my 500 keyboard detachable, and I will discribe
in detail how I did it for anyone who wants to know (preferably by email
because it is a lengthy discription).  It was very easy to do (all
you have to know how to do is turn a screwdriver and splice a few (eight)
wires.The hard part is finding a 2x00 (or 3000) case to put your old
keyboard into (or you can use a 2x00 or 3000 keyboard, but you won't
have power and drive lights).  Mine cost me $30, but I got ripped off on
the keyboard case, the total should be about $15.
Raoul "My 500 Has a Detachable Keyboard" Rodriguez
n368bq@tamuts.tamu.edu
Standard Disclaimers Apply (Within)