Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Running CLI from DF1:
Message-ID: <796@cbmger.UUCP>
Date: 28 Jan 91 15:58:07 GMT
References: <1991Jan25.035427.15004@usenet.ins.cwru.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 14

In article <1991Jan25.035427.15004@usenet.ins.cwru.edu> nnn@po.CWRU.Edu (Nik N. Nik Mahdi) writes:
>
>   I have a problem. Whenever I boot a disk without a CLI file
>or Icon, I could not run the CLI when I have a disk with a CLI
>file in DF1:. 
>   When I double-click the CLI icon on DF1:, the Cli box
>appears for a couple of seconds and then it disappears.

You need more than just the CLI file to run a CLI. Try to provide
also the programs "execute" and "run" in the C: directory.

-- 
Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk