Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!apple!bionet!ucselx!petunia!csuchico.edu!ekrimen
From: ekrimen@ecst.csuchico.edu (Ed Krimen)
Newsgroups: comp.sys.atari.st.tech
Subject: Re: SIMM / MULTISYNCH
Message-ID: <1991Jan23.185802.387@ecst.csuchico.edu>
Date: 23 Jan 91 18:58:02 GMT
References: <11626@pt.cs.cmu.edu> <1991Jan22.194747.23627@ecst.csuchico.edu> <1991Jan23.082755.22808@santra.uucp>
Sender: news@ecst.csuchico.edu (USENET)
Organization: California State University, Chico
Lines: 22

- >The NEC 2A won't work 'cause it's not a 'true' multisync.  I'm using 
- >an NEC 3D right now.  I know others who have used NEC II, Sony 1302, 
- >and many other models.  There are some basic guidelines to the type 
- >of monitor you can use.
- >
-
- Jennie, don't believe him! I have used Nec 2A with ST, and I still 
- have that cable to do so available. The cable is made by Lindy and is
- available at least in Germany. But it is a quite easy one to make
- yourself too.
 
The reason I said it won't work with the ST is that a couple of people 
told me that it won't sync when connected to the ST; therefore, I 
didn't risk trying it out, since they know more about it than I.  I 
don't go around making these things up. :^)  Do you get all three
resolutions with the 2a or just color or mono?

-- 
         Ed Krimen  ...............................................
   |||   Video Production Major, California State University, Chico
   |||   INTERNET: ekrimen@ecst.csuchico.edu  FREENET: al661 
  / | \  SysOp, Fuji BBS: 916-894-1261        FIDONET: 1:119/4.0