Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!sdd.hp.com!hp-pcd!hpcvra.cv.hp.com!rnews!hpcvbbs!akcs.tyrone
From: akcs.tyrone@hpcvbbs.UUCP (Tyrone Johnson)
Newsgroups: comp.sys.handhelds
Subject: Re: *** HP48SX Interface Cable ***
Message-ID: <279f573f:1788.1comp.sys.handhelds;1@hpcvbbs.UUCP>
Date: 24 Jan 91 22:40:05 GMT
References: <10439@jarthur.Claremont.EDU>
Lines: 5

It can be dirt cheap, with one major hangup ofcourse.......You have to be
able to find the parts somewhere.  After long searches and hundreds of
phone calls you may track down one or two connectors, then, if you can't
solder very well you'll screw them up and have to start over from the
beginning.
But yes, you can make it from scratch.