Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!lll-winken!elroy.jpl.nasa.gov!sdd.hp.com!hp-pcd!hpfcso!rjn
From: rjn@hpfcso.HP.COM (Bob Niland)
Newsgroups: comp.sys.hp
Subject: Re: dip switch settings serial thinkjet hp2225d
Message-ID: <7370292@hpfcso.HP.COM>
Date: 29 Jan 91 18:48:42 GMT
References: <1991Jan29.082858.4773@ims.alaska.edu>
Organization: Hewlett-Packard/FSY Ft.Collins,CO,USA
Lines: 21

re: > i'm looking for information about the dip switch settings for a SERIAL
    > HP2225D thinkjet printer.  

No manual handy, but found this in a file...

| Mode   |           |                                              |
|   1    |   Down    | Map CR to CR only, not to CRLF               |
|   2    |   Down    | Map LF to LF only, not to CRLF               |
|   3    |   Down    | Perforation skip OFF (vs ON)                 |
|   4    |   Down    | Page length = 11 inches (vs 12)              |
|   5    |   Down    | Command set = HP PCL (vs IBM/Epson)          |
|  6-8   | All down  | Character set = HP ROMAN8                    |
|RS-232C |           |                                              |
|   1    |   Down    | RS-232C pacing is Xon/Xoff                   |
|        |    Up     | RS-232C pacing is DTR                        |
|  2,3   | Both down | Character frame is 8 bits, no parity         |
|  4,5   | Both down | 9600 bps                                     |

Regards,                                              Hewlett-Packard
Bob Niland      Internet: rjn@FC.HP.COM               3404 East Harmony Road
                UUCP: [hplabs|hpfcse]!hpfcrjn!rjn     Ft Collins CO 80525-9599