Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!motcid!ahlenius
From: ahlenius@motcid.UUCP (Mark Ahlenius)
Newsgroups: comp.sys.mac.hardware
Subject: mac + hw question
Summary: Question on mac+ analog board
Keywords: mac+ analog board
Message-ID: <5677@turquoise.UUCP>
Date: 25 Jan 91 13:17:43 GMT
Distribution: comp
Organization: Motorola Inc., Cellular Infrastructure Div., Arlington Heights, IL
Lines: 17

Can someone tell me if its ok to power up the analog board on a mac+ without
having the logic board plugged in?  Without having a schematic, I was concerned
that necessary sync pulses for the video driver circuitry might be missing
and cause problems in the driver circuitry (like permanent problems).

Also, a last plea for anyone who might have a schematic for the mac+ analog
board.  The repair books I have looked at only have partial schematics.

	thanks!

		'mark

-- 
===============	regards   'mark  =============================================
Mark Ahlenius 		  voice:(708)-632-5346  email: uunet!motcid!ahleniusm
Motorola Inc.		  fax:  (708)-632-2413
Arlington, Hts. IL, USA	 60004