Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!nstn.ns.ca!news.cs.indiana.edu!julius.cs.uiuc.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!mcsun!hp4nl!dutrun!duteca2!thomas
From: thomas@duteca (Thomas Okken)
Newsgroups: comp.sys.mac.hardware
Subject: How to set SCSI ID on Quantum Q250?
Message-ID: <1183@duteca2.UUCP>
Date: 25 Jan 91 02:53:15 GMT
Reply-To: thomas@duteca.et.tudelft.nl (Thomas Okken)
Organization: Delft University of Technology, Dept. of Electrical Engineering
Lines: 14

Newsgroups: comp.sys.mac.hardware
Subject: Setting the SCSI ID of a Quantum Q250
Reply-To: thomas@duteca.et.tudelft.nl (Thomas Okken)
Distribution: world

I just got a 210M HD for my Mac II and used it to replace the original,
Apple-supplied Quantum Q250 43M 5.25" hard disk. I'd like to mount
the Quantum in an external case, but I need to be able to change its SCSI
ID, which is now 0, so it will not conflict with the internal drive.
I can't find any switches or such on the controller, but there is one
unused 16-pin connector (male, rectangular, 2 rows of 8 pins each).
Anyone know how this is done?

 - Thomas (thomas@duteca.et.tudelft.nl)