Xref: utzoo comp.windows.ms:8793 comp.terminals:2537 Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!titan!larry From: larry@titan.tsd.arlut.utexas.edu (Larry Maturo) Newsgroups: comp.windows.ms,comp.terminals Subject: Windows Terminal Keywords: kermit, terminal Message-ID: Date: 29 Jan 91 20:49:05 GMT Sender: news@titan.tsd.arlut.utexas.edu Reply-To: larry@unicorn.titan.tsd.arlut.utexas.edu (Larry Maturo) Organization: Applied Research Labs, The University of Texas at Austin Lines: 29 References: I have two problems with Windows Terminal. 1. When I hangup after a session I must exit windows before I can dial again. Otherwise it complains of the port being in use. What am I doing wrong? 2. When transferring files from a SUN Unix system to a PC running Windows term I have a real problem with KERMIT binary mode. If the file I send in binary mode has only printable ASCII characters (and newlines) all is well. If it is a .zip file for example I get enough errors to abort the send. I have tried, on the Unix side kermit -i and a few others. I have checked the bits 8, one stop bit, no parity, etc, parameters on both sides with no luck. Any help will be sincerely appreciated since I have tried everything I could think of already. +-----------------------------------+----------------------------------------+ | | | | Larry Maturo | Opinions expressed herein must be | | Applied Research Laboratories | yours, neither I nor my employer have | | University of Texas at Austin | any. | | P.O. Box 8029 +----------------------------------------+ | Austin, Texas 78713-8029 | | | | When you're as great as I am it's hard | | larry @titan.tsd.arlut.utexas.edu | to be modest, but I succeed where | | | others fail. | +-----------------------------------+----------------------------------------+