Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!decwrl!deccrl!bloom-beacon!eru!hagbard!sunic!mcsun!ukc!icdoc!qmw-cs!liam
From: liam@cs.qmw.ac.uk (William Roberts;)
Newsgroups: comp.unix.aux
Subject: Re: Mounting Mac O/S disks for back-up
Message-ID: <2879@redstar.cs.qmw.ac.uk>
Date: 28 Jan 91 15:19:54 GMT
References: <15122@milton.u.washington.edu>
Sender: usenet@cs.qmw.ac.uk
Lines: 37
Nntp-Posting-Host: whitesand

In <15122@milton.u.washington.edu> grahams@milton.u.washington.edu (Stephen 
Graham) writes:

>Sorry if this is in the manual set, but I haven't found it yet.
It isn't.

>We have a Mac with one A/UX disk and one Mac O/S disk connected
>(these are two separate disks, not partitions)
>to a network of Suns. What we'd like to do is mount the Mac disk
>on the network so we can dump its contents to our Exabyte tape drives
>rather than continue to borrow someone's Apple Tape Drive. Is there
>a way to do this?

No, but you can consider the following options:

1) Use the MacDump (?) program which is floating around in the MacOS world and
which talks to a UNIX host using standard rmt protocols to dump a Mac 
filesystem. A version of this which works through MacTCP would probably work 
under A/UX 2.0 and should do proper incremental dumping. Can't say as I've 
ever tried it though.

2) Use dd under A/UX to save the complete disk image onto the Exabyte. This 
has the advantage of being much faster than any file-level dumping, but of 
course you have to pull back the whole thing: you can't get back individual 
files. The device names to look at are (for SCSI id X)

    /dev/dsk/cXd0s31 - the complete disk image including MacOS drivers
    /dev/dsk/cXd0s30 - the HFS volume only

The dp program will tell you about the partition sizes, and the block device 
drivers won't let you run off the end anyway.
--

William Roberts                 ARPA: liam@cs.qmw.ac.uk
Queen Mary & Westfield College  UUCP: liam@qmw-cs.UUCP
Mile End Road                   AppleLink: UK0087
LONDON, E1 4NS, UK              Tel:  071-975 5250 (Fax: 081-980 6533)