Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!spool2.mu.edu!uwm.edu!uwvax!meteor!sleaze.meteor.wisc.edu!bt
From: bt@sleaze.meteor.wisc.edu (Bill Taylor)
Newsgroups: comp.unix.sysv386
Subject: Re: Exabyte drive on Intel V.4 with WD7000
Keywords: Intel V.4, WD7000, Exabyte
Message-ID: <1991Jan26.225503.1747@meteor.wisc.edu>
Date: 26 Jan 91 22:55:03 GMT
References: <1991Jan24.184603.9612@meteor.wisc.edu> <1991Jan25.181355.16475@virtech.uucp>
Sender: @meteor.wisc.edu
Reply-To: bt@sleaze.meteor.wisc.edu (Bill Taylor)
Organization: University of Wisconsin-Madison, Meteorology and Space Science
Lines: 32

In article <1991Jan25.181355.16475@virtech.uucp>, cpcahil@virtech.uucp (Conor P. Cahill) writes:
|> In article <1991Jan24.184603.9612@meteor.wisc.edu> bt@meteor.wisc.edu (Bill Taylor) writes:
|> 
|> The second piece is the number of "LUs supported by the TC".  I don't really
|> know what this is, but for 99.9% of the SCSI devices out there it will be a
|> 1.  
|> 

Most Scsi devices only have one logical device which is attached to the
controller. Some like the Emulex MD/21 will talk to 2 Esdi drives. And
some like the Scientific Micro Systems Omti 7400 will talk to 2 esdi
or st506 drives , 4 floppies, and a streamer tape.

|> So to get your tape drive working add a line to the table that says
|> something like:
|> 
|> 	"Exabyte id string....    ", 1, /* Exabyte 8mm tape drive */

Acutally did fix the problem! The sdo1 directory was for hard drives
and there was one I think called st01 which when I placed the entry
enabled the device /dev/rmt/c0s0

The UUCP entries are set up and if I go "cu sleaze":

	It finds the line, the modem, the dialer, dials the phone
	and even connects correctly. While spiiting lots of debug messages
	to the screen. 

plain "cu" gives me a "CONNECTED" message but I can not control the modem
and dial. uucico never gets the phone dialed.

??