Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!decwrl!elroy.jpl.nasa.gov!zardoz.cpd.com!tmiuv0!rick From: rick@tmiuv0.uucp Newsgroups: comp.periphs.scsi Subject: Re: Seagate ST01 or ST02 SCSI host adaptors Message-ID: <2317@tmiuv0.uucp> Date: 31 Jan 91 10:05:20 GMT References: Organization: Technology Marketing Inc., Irvine, CA Lines: 27 In article , ben@epmooch.UUCP (Rev. Ben A. Mesander) writes: > The following is posted for a friend [ahrea@gwdokokl.UUCP] who wants to > know whether he has a Seagate ST01 or ST02 SCSI host adaptor. You may > reply directly to him, or to me, and I will forward it on. > > ------------------------------------------------------------------------- > I pulled out my SCSI controller card and will try to describe it for > you. Hopefully this will be enough to figure out if it is an ST01 or > an ST02. > > It is a half-length PC card with three chips on it, a ribbon cable > connector at the top, and a few jumpers, etc. scattered around. The > chip on the left is marked like this, (on a sticker): Whoa! The single ribbon cable clinches it. It's an ST-01. The ST-02 also supports floppy disks, so there'd be two ribbon cable connectors. .--------------------------------------------------------------------------. |[- O] Rick Stevens | | ? EMail: uunet!zardoz!tmiuv0!rick -or- uunet!zardoz!xyclone!sysop | | V CIS: 75006,1355 (75006.1355@compuserve.com from Internet) | | | | "Everybody has to deviate from the norm...." | | - Rush | | "I guess that makes me a deviant!" | | - Me! | '--------------------------------------------------------------------------`