Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!ns-mx!umaxc.weeg.uiowa.edu!mtpins From: mtpins@umaxc.weeg.uiowa.edu (Firestar) Newsgroups: comp.sys.amiga.datacomm Subject: Re: DNet Message-ID: <4234@ns-mx.uiowa.edu> Date: 31 Jan 91 04:15:53 GMT References: <4214@ns-mx.uiowa.edu> <7086@uqcspe.cs.uq.oz.au> Sender: news@ns-mx.uiowa.edu Reply-To: mtpins@umaxc.weeg.uiowa.edu (Firestar) Organization: U of Iowa, Iowa City, IA Lines: 30 In article <7086@uqcspe.cs.uq.oz.au> baggins@batserver.cs.uq.oz.au writes: >In <4214@ns-mx.uiowa.edu> mtpins@umaxc.weeg.uiowa.edu (Firestar) writes: :>I grabbed a copy of DNet v2.10 from Fish Disk 294. I then set up the Amiga :>side, no problems. I then tried to set up the Unix side. It appeared to :>compile OK. However, when I try to run the unix side of DNet, I get a :>'segmentation fault'. I'm running it on an Apollo under BSD. :>Any idea, suggestions, etc. would be most appreciated. >Yes. Give up! or at least wait for version 10.3 of DomainOS. The problem >you have is a system call (I forget which one but it took hours to find) >that has been implemented as a stub. There is simply no code for it. I was >going to get to a workaround but my knowledge of the Apollo internals is >limited. I ran it on the suns here and ran an fterm to the Apollos from >there. Pity, I like the Apollos, variable links are so cute! I'm running a csh under DomainOS 10.3. Nice try, but.... Someone emailed a suggestion to swap the bind() and fcntl() commands in dnet.c. After doing so and recompiling, it starts to run, giving me the "FTerm V2.10L.04 opening, wait..." window, and hangs. Any other ideas? I saw mention of a newer version, which I'll grab and see if it helps anything. Firestar -- ***************************************************************************** * Michael Pins (Firestar) | Internet: mtpins@umaxc.weeg.uiowa.edu * * ISCA's Amiga Librarian | #include * *****************************************************************************