Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!elroy.jpl.nasa.gov!ncar!gatech!usenet.ins.cwru.edu!eagle!data.nas.nasa.gov!noc.arc.nasa.gov!gutierre
From: gutierre@noc.arc.nasa.gov (Robert Michael Gutierrez)
Newsgroups: comp.sys.amiga.hardware
Subject: Solder Jump for Chinon 2nd drive???
Message-ID: <1991Jan20.015618.12224@nas.nasa.gov>
Date: 20 Jan 91 01:56:18 GMT
Sender: news@nas.nasa.gov
Reply-To: gutierre@noc.arc.nasa.gov (Robert Michael Gutierrez)
Organization: The Saotome Ryu School of Martial Arts
Lines: 15

Hello there.

I need to know what to solder-jump to make the Chinon drive as Drive 1 (2nd
internal drive) on my 2000.

I saw the 6 solder pads on the bottom of the drive, and need to know which ones
to solder together (or jump to ground???) to make it my 2nd drive.

Thanks in advance.


   robert.

[p.s... I will describe my final resolution about my 2091 controller and
	my Syquest H.D.'s sometime this week.]