Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!decwrl!parc!mohabir
From: mohabir@parc.xerox.com (Daniel A. Mohabir)
Newsgroups: comp.sys.amiga.hardware
Subject: A3000 and re-selection
Message-ID: <1991Jan30.205342.18887@parc.xerox.com>
Date: 30 Jan 91 20:53:42 GMT
Sender: news@parc.xerox.com
Organization: DS, XEROX
Lines: 14
Originator: mohabir@arisia

I have been following the discussion on the A2091 and how reselection has 
to be turned off if more that one hard drive is used in the system. Well, 
I have ordered my A3000 and should receive it shortly. I plan to install 
a 200 meg Conner hard drive and a Syquest drive to it immediately with 
plans to add a ROM drive in the near future. Do I have to disable 
reselection also or is this problem not applicable to the A3000? I know 
that the A3000 uses the same WD SCSI chip as the A2091.
Thanks for any info.

-- 
|******************************|*****************|********************|
|  Daniel A. Mohabir           |  Phone:         |  Amiga.            |
|  Email: mohabir@arisia.UUCP  |  (716)427-1886  |  Just do it!       |
***********************************************************************