Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!jkt100 From: JKT100@psuvm.psu.edu (JKT) Newsgroups: comp.sys.amiga.hardware Subject: Expanding RAM on an A2000/HD Message-ID: <91034.212552JKT100@psuvm.psu.edu> Date: 4 Feb 91 02:25:52 GMT Organization: Penn State University Lines: 35 My system is an A2000 with an A2091; 2 megs of 256x4's on the 2091. Until recently I thought if I ever wanted more RAM, I could just plug any RAM expansion board into my 2000 and the RAM I had would autoconfig with any RAM on that board. Some folks have hinted, though, that this might not work; I didn't totally understand what the problem might be, but they implied the RAM might not be continuous or something. So anyway, my question comes in two parts, as I do not quite know yet what I want to do (and what I do might well depend on the answers to these questions!): A) If I decide I do not want to accelerate my Ami, and just want to add 16-bit Fast RAM, what are my options? Can I indeed just plug it in and go, or are there really problems? If there are problems, what are they, and what can I use with my 2091's existing memory? B) Should I decide I want to accelerate my 2000, I already know I should get lotsa 32-bit memory on-board to go with it to take full advantage of the '030. Question is, will this memory work in conjunction with my 2091's memory, or do I have to lose the 16-bit RAM on it? Any answers appreciated, by mail or posted here - your choice. :-) Kurt -- ----------------------------------------------------------------------- || Kurt Tappe (215) 363-9485 || With. Without. And who'll || || 184 W. Valley Hill Rd. || deny it's what the fighting's || || Malvern, PA 19355-2214 || all about? - Pink Floyd || || jkt100@psuvm.psu.edu --------------------------------------|| || jkt100@psuvm.bitnet jkt100%psuvm.bitnet@psuvax1 QLink: KurtTappe || -----------------------------------------------------------------------