Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!sdd.hp.com!spool2.mu.edu!uunet!mcsun!hp4nl!sci.kun.nl!cs.kun.nl!rhialto
From: rhialto@cs.kun.nl (Olaf 'Rhialto' Seibert)
Newsgroups: comp.sys.amiga.misc
Subject: Re: Need help to mount MSH:
Message-ID: <2702@wn1.sci.kun.nl>
Date: 29 Jan 91 17:22:13 GMT
References: <42944@nigel.ee.udel.edu>
Sender: root@sci.kun.nl
Organization: University of Nijmegen, The Netherlands
Lines: 21

In article <42944@nigel.ee.udel.edu> GELSON%SBU.UFRGS.ANRS.BR@uicvm.uic.edu (Gelson Dias Santos) writes:
>     Hello people,
[...]
>I intend to use the MSH: handler, but I don't know how to write the correct
>MountList for my system. My system is an A500 stock (only 1 disk drive, 512K
>and the new Agnus chip). The PC have a standard drive (720K). I don't know how
>many tracks and sectors it have.

The Mountlist as distributed with MSH: will be almost OK for your case.
You only have to change the Unit = 1 into Unit = 0, so that DF0: is used
for MSH: instead of DF1:. All other things usually don't have to change
(much). Only if you want to have all MSH related files on a special disk
you'll want to use absolute path names for Device = DISK:devs/messydisk.device
and FileSystem = DISK:l/MessyFileSystem.

>     Thanks in advance.
>         *****    # Gelson Dias Santos                #
--
--
Olaf 'Rhialto' Seibert                               rhialto@cs.kun.nl
How can you be so stupid if you're identical to me? -Robert Silverberg