Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!wuarchive!uunet!decwrl!mcnc!uvaarpa!vger.nsu.edu!manes
From: manes@vger.nsu.edu ((Mark D. Manes), Norfolk State University)
Newsgroups: comp.sys.amiga.programmer
Subject: SAS Include FILES from HELL, film at 11pm.
Message-ID: <600.27ad2858@vger.nsu.edu>
Date: 4 Feb 91 13:24:39 GMT
Lines: 28

I recently purchased SAS/C and kissed goodbye the MANX C compiler that 
I have used for years.
 
Now I have a problem.  All was going exceedingly well until I decided
to include <exec/exec.h>, when I did this and compiled my program the
compiler complained about needing a closing brace in the nodes.h file
(it was pulled in by exec.h).

Seeing this I realized that I had seen a update from SAS/C 5.10 to
SAS/C 5.10a on CompuServe.  I got this update and ran it.  All went
fine in applying the patch(s), however it did not solve this problem.

I re-installed the C compiler and went through the patching process
again.  Alas, no luck.
 
What is the solution?  If anyone can help it will be appreciated.
I thought I would save myself from some phone-tag at SAS.
 
Your help is most appreciated.  Thank you for your support.

 -mark=
     
 +--------+   ==================================================          
 | \/     |   Mark D. Manes                    "Mr. AmigaVision" 
 | /\  \/ |   manes@vger.nsu.edu                                        
 |     /  |   (804) 683-2532    "Make up your own mind! - AMIGA"
 +--------+   ==================================================