Path: utzoo!utgpu!cunews!micor!latour!atronx!rwm
From: rwm@atronx.OCUnix.On.Ca (Russell McOrmond)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Removable Harddrive help
Message-ID: <58696.665199379@atronx.OCUnix.On.Ca>
Date: Tue Jan 29 19:36:19 1991
Followup-To: comp.sys.amiga.tech
In-Reply-To: jesup@cbmvax.commodore.com (Randell Jesup)

In a message posted on 28 Jan 91 23:04:54 GMT,
jesup@cbmvax.commodore.com (Randell Jesup) wrote:
RJ>	Make sure you have reselection turned off when you set up (HDToolBox)
RJ>the disks.  See the articles I've published here before.  When the ROMs
RJ>are available you'll want to upgrade the 2091.

Or the nasty 'Hardware Type Person' way and Switch the SCSI chip with an older
controller (IE: 2090a) that isn't being used at the moment, and keep the new
chip for when the New Roms come out.  (P.S.  Obviously this works : We needed to
do this for a customer that insisted on having the Speed, as well as having a 
RICHO drive and a 40M Quantum - Tested out perfectly with the old chip ..)

 I assume that the 6.1 ROMS aren't the 'updated', then??

RJ>Randell Jesup, Keeper of AmigaDos, Commodore Engineering.
RJ>{uunet|rutgers}!cbmvax!jesup, jesup@cbmvax.commodore.com  BIX: rjesup  
RJ>The compiler runs
RJ>Like a swift-flowing river
RJ>I wait in silence.  (From "The Zen of Programming")  ;-)

---
  Opinions expressed in this message are my Own. I represent nobody else.
  Russell McOrmond   rwm@Atronx.OCUnix.On.Ca   {tigris,alzabo,...}!atronx!rwm 
  FidoNet 1:163/109  Net Support: (613) 230-2282
  Amiga-Fidonet Support  1:1/109       Gateway for .Amiga.OCUnix.On.Ca