Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!dimacs.rutgers.edu!mips!sjsca4!poffen From: poffen@sj.ate.slb.com (Russ Poffenberger) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: Using "Disk Manager" software Message-ID: <1991Jan31.000357.15747@sj.ate.slb.com> Date: 31 Jan 91 00:03:57 GMT References: <40187@super.ORG> <91023.090401ESR@SLACVM.SLAC.STANFORD.EDU> <1991Jan28.132309@hammer.Prime.COM> <1991Jan29.074020.27490@cs.umn.edu> Reply-To: poffen@sj.ate.slb.com (Russ Poffenberger) Distribution: usa Organization: Schlumberger Technologies, San Jose, CA. Lines: 21 In article <1991Jan29.074020.27490@cs.umn.edu> brian@mermaid.micro.umn.edu (Brian) writes: >cummings@hammer.Prime.COM (Kevin Cummings) quotes everything that >>ESR@SLACVM.SLAC.STANFORD.EDU (Ed Russell) writes: >[deleted] >>using SpeedStore instead. Using Disk Manager to convert my Vertex V185 >>disk drive (60MB) into two 30MB partitions, Windows 3.0 claims that >>DMDRVR.BIN is incompatible with Windows 3.0 Enhanced mode swap files, >>and will refuse to run the swapfile program while the string DMDRVR is >>found in my CONFIG.SYS file! On the other hand, the new drive I just > >My Mom is running a 60Meg partition using Disk Manager, and Windows 3.0 >has NO trouble with it. Of course it's a 286. But... > The problem shows up in 386 enhanced mode using a permanent swap file. Russ Poffenberger DOMAIN: poffen@sj.ate.slb.com Schlumberger Technologies UUCP: {uunet,decwrl,amdahl}!sjsca4!poffen 1601 Technology Drive CIS: 72401,276 San Jose, Ca. 95110 (408)437-5254