Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!asuvax!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!uwm.edu!psuvax1!psuvm!avp100
From: AVP100@psuvm.psu.edu
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Software/SCSI Bios Conflict
Message-ID: <91031.200425AVP100@psuvm.psu.edu>
Date: 1 Feb 91 01:04:25 GMT
Organization: Penn State University
Lines: 14

Hi,
   I have a DTK 2503 386/25 running with a WD1006 HD/FD controller and a ST01/1
6k BIOS SCSI controller.  The controller BIOS is 3.1.9 and it came with my Syqu
est 44Mb removable drive.  The problem I'm having is that old programs such as
games or even newer programs using a non-Dos booting scheme causes m system to
error and go to the 'Hit F1 to continue or run SETUP' msg.  The system refuses
to boot any of these programs at all.  When I pull the ST01 card, all the progr
ams operate normally.  It seems the ST01 bios is conflicting with the SCSI bios
 on the ST01 card.   BTW, I also tried removing the SCSI driver from my config
file, but the programs don't work that way either.  Any ideas on the problem?

                                           Thanks
                                           A.P.
                                           AVP100 at psuvm