Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!uw-beaver!mit-eddie!bbn.com!nic!bunny!dhp1
From: dhp1@gte.com (Dave Pascoe)
Newsgroups: comp.sys.mac.comm
Subject: NCSA Telnet 2.3 through NetBridge
Message-ID: <10488@bunny.GTE.COM>
Date: 31 Jan 91 20:10:10 GMT
Organization: GTE Laboratories Incorporated, Waltham MA
Lines: 71


We have two LocalTalk networks connected by a Shiva NetBridge.  I reside in
LocalTalk Net #2.  In Net #1 there's a Kinetics FastPath connected to a small
Ethernet.
 
When the NetBridge was first installed it was configured so Net #1 and Net #2
possessed the same zone name.  For reasons which aren't important, the NetBridge
had to be reconfigured to create two separate zone names.
 
Problem:  When the zones had the same name I was able to find the FP gateway
and use NCSA Telnet to connect to a workstation.  Now, with the different zone
names, I can't.  I revised my config.tel file to reflect the new configuration, i.e., I
inserted a zone="name" to point to the zone where the FastPath resides .
 
Any ideas?  I called Shiva and they said this should be possible but it doesn't seem
to work....nothing else has changed.
 
Here's the config.tel file:
 
hardware=AppleTalk
zone="NDHM EDCD"
ftp=yes
termtype="vt100"		# terminal type to advertise (safe bet)
arptime=5
name=Shelf_Life		# Session name, "default" is a reserved name
host=Shelf_Life		# Actual host name of machine, not session name
hostip=100.14.40.1		# IP address of host, example is for SRI-NIC
#gateway=1		# This machine is a gateway for me
#nameserver=1		# This machine has a DOMAIN name server for me
scrollback=100		# number of lines of scrollback per session
erase=delete		# use delete code or backspace code for <- key?
				#   legal values are "delete" and "backspace"
vtwrap=yes		# should VT100 be in wrap mode or not?
nfcolor="{0,0,0}"		# normal, foreground (Mac II)
nbcolor="{65535,65535,65535}"	# normal, background (Mac II)
bfcolor="{0,0,0}"		# blink, foreground (Mac II)
bbcolor="{65535,65535,65535}"	# blink, background (Mac II)
#crmap=4.3BSDCRNUL		# map of the CR key for compatibility
#duplex=half			# modifier for non-echo mode, forces send
clearsave=yes			# save lines on clear screen yes/no
contime=30		# timeout in seconds to try connection
retrans=30		# starting retransmit time out in ticks
				#   1/60ths of sec 
mtu=512			# maximum transmit unit in bytes
				#   AppleTalk MAX = 512
				#   outgoing packet size, ET MAX=1024
maxseg=512		# largest segment we can receive
				#   AppleTalk MAX = 512
				#   whatever the hardware can take, ET MAX=1536
rwin=512			#   TCP window size, MAX=4096
#name=mynameserver ; hostip=127.0.0.2 ; nameserver=1 
name=IPGATEWAY; hostip=100.14.40.3 ; gateway=1
name=zippy ;	host=zippy;	hostip=100.14.40.2
name=compaq ;	hostip=100.14.40.4
name=hobbes ;	host=hobbes;	hostip=100.14.40.5
name=bela;	hostip=100.14.40.30
name=pascoe;	hostip=100.14.40.29
name=bigmac;	hostip=100.14.40.27
name=aknad;	hostip=100.14.40.26
name=deptmacII; hostip=100.14.40.25
#name=;	hostip=100.14.40.24
#name=;	hostip=100.14.40.23
#name=;	hostip=100.14.40.22
#name=;	hostip=100.14.40.21
#name=;	hostip=100.14.40.20
 
 
-- 
Dave Pascoe   |  Internet: dhp1@gte.com 
GTE/EDCD      |  UUCP: ...!{harvard}!gte.com!dhp1
KM3T          |  Packet Radio: km3t @ ka2qhd.nj