Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.sysv386
Subject: Re: Bell Tech Memory expansion
Message-ID: <1991Feb04.174339.1514@virtech.uucp>
Date: 4 Feb 91 17:43:39 GMT
References: <1991Feb4.103052.27511@actrix.gen.nz>
Reply-To: cpcahil@virtech.UUCP (Conor P. Cahill)
Organization: Virtual Technologies Inc., Sterling VA
Lines: 33

In article <1991Feb4.103052.27511@actrix.gen.nz> jshaw@actrix.gen.nz (Jim Shaw) writes:
>I have a Bell Technologies MPE systems, now a couple of years old that has 4
>Meg of memory on the mother board. Can anyone suggest a supplier for an
>expansion card for it so that I can add another 4 or 8 Meg??

We had an old (probably older than yours) MPE and added an 8MB card.  The
card info follows:

	Card:		JRAM-386-2
	Manufacturer:	Tall Tree Systems
			2585 East Bayshore Road
			Palo Alto, CA 94303

			(415) 493-1980

	Distributor:	Scherstad Systems, Inc.
			7808 Glenroy Road
			Bloomington, MN 55435
		
			(612) 921-0900

NOTES:

	1. This info is from August 1988
	2. From your description I would say it is for an older version of
	   the MPE motherboard (it had 2 32 bit slots with only 512K on the
	   motherboard), but this may be a starting point.


-- 
Conor P. Cahill            (703)430-9247        Virtual Technologies, Inc.
uunet!virtech!cpcahil                           46030 Manekin Plaza, Suite 160
                                                Sterling, VA 22170