Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!usc!sdd.hp.com!uakari.primate.wisc.edu!samsung!rex!ukma!usenet.ins.cwru.edu!po.CWRU.Edu!krg2
From: krg2@po.CWRU.Edu (Kevin R. Glazier)
Newsgroups: comp.windows.ms
Subject: Re: NCSA telnet under windows ... PIF needed
Message-ID: <1991Jan31.015311.27838@usenet.ins.cwru.edu>
Date: 31 Jan 91 01:53:11 GMT
References: <2200@travis.csd.harris.com>
Sender: news@usenet.ins.cwru.edu
Reply-To: krg2@po.CWRU.Edu (Kevin R. Glazier)
Organization: Case Western Reserve University, Cleveland, OH (USA)
Lines: 21
Nntp-Posting-Host: cwns6.ins.cwru.edu


In a previous article, leoh@hardy.hdw.csd.harris.com (Leo Hinds) says:

>Would anyone that has a working set of PIFs for using NCSA's telnet/ftp
>while under windows please send me a copy of the PIF(s) ... thanks
>

   I have the same problem.  When I first installed Windows 3.0 on my 
system, I ran NCSA telnet as a DOS application with no PIF file and it
ran fine.  But recently I reformatted my hard drive and re-installed 
Windows.  Now I can't get telnet to run at all, even with various PIF
files.  All I can suggest is to get a copy of WINQVTNET (available
at cica).  I use it on my system with no problems.  Hope this helped.

Later.
-- 
Kevin R. Glazier |     Michelson 540       | "War is our profession,
    C/4th/C      |  (The Officer's Club)   |  but peace is our goal..."
    U.S.A.F.     |  ********************   |    -Strategic Air Command
    "The price of freedom is eternal vigilance." -- Thomas Paine