Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!samsung!munnari.oz.au!metro!usage.csd.unsw.oz.au!vast.eecs.unsw.oz!aidan
From: aidan@vast.eecs.unsw.oz (Aidan Williams)
Newsgroups: comp.databases
Subject: wview now working...
Message-ID: <1059@usage.csd.unsw.oz.au>
Date: 7 Feb 91 04:17:52 GMT
Sender: news@usage.csd.unsw.oz.au
Reply-To: aidan@vast.eecs.unsw.oz (Aidan Williams)
Organization: VLSI And Systems Technology Laboratory, EECS, UNSW, Australia
Lines: 63

Many thanks to those people that sent me their thoughts...

Here is a summary of what they said (and what works for me):

here we go:

1st:  On your xserver 'xset -bc'  to make it backwardly compatible with
      X11R3 ... (since I was running X11R4)

2nd:  'setenv TERM_INGRES wview'

3rd:  'wview -display server_to_contact'

	'wview' itself is just a modified xterm...

	This should result in a INGRES/WindowView window begin created
	on your display.

	NOTE:  if you use csh,  wview will source the .cshrc and will
	reset the value of TERM_INGRES to whatever is in your .cshrc

It works rather well...

rgds
	Aidan
From: aidan@vast.eecs.unsw.oz (Aidan Williams)
Path: vast.eecs.unsw.oz!aidan
Newsgroups: comp.databases
Subject: ingres/wview now working...
Expires: 
References: 
Sender: aidan@vast.eecs.unsw.oz (Aidan Williams)
Reply-To: aidan@vast.eecs.unsw.oz (Aidan Williams)
Followup-To: 
Distribution: world
Organization: VLSI And Systems Technology Laboratory, EECS, UNSW, Australia
Keywords: ingres

Many thanks to those people that sent me their thoughts...

Here is a summary of what they said (and what works for me):

here we go:

1st:  On your xserver 'xset -bc'  to make it backwardly compatible with
      X11R3 ... (since I was running X11R4)

2nd:  'setenv TERM_INGRES wview'

3rd:  'wview -display server_to_contact'

        'wview' itself is just a modified xterm...

        This should result in a INGRES/WindowView window begin created
        on your display.

        NOTE:  if you use csh,  wview will source the .cshrc and will
        reset the value of TERM_INGRES to whatever is in your .cshrc

It works rather well...

rgds
        Aidan