Path: utzoo!utgpu!watserv1!watmath!att!linac!midway!mimsy!oasys!harvey From: harvey@oasys.dt.navy.mil (Betty Harvey) Newsgroups: comp.protocols.nfs Subject: Re: DesqView-386 and PC-NFS Telnet Message-ID: <5754@oasys.dt.navy.mil> Date: 6 Feb 91 14:19:53 GMT References: <1991Feb1.122149.1522@cs.eur.nl> <5742@oasys.dt.navy.mil> Reply-To: harvey@oasys.dt.navy.mil (Betty Harvey) Followup-To: comp.protocols.nfs Organization: David Taylor Research Center, Bethesda, MD Lines: 110 In article <5742@oasys.dt.navy.mil> link@dtoa3.dt.navy.mil (Link) writes: >In article <1991Feb1.122149.1522@cs.eur.nl> evas@cs.eur.nl (Eelco van Asperen) >writes: >>Has anyone succeeded in running PC-NFS Telnet in a DesqView-386 (v2.3) >>window ? So far, it crashes everytime I switch from the Telnet task to >>another task; not right away but after a while. It either hangs the >>machine without a message or QEMM complains about a #13 exception and >>then hangs the machine. BTW, the machine concerned is a 386-25Mhz >>with 4Mb RAM. I've set the parameters for Telnet so it would not be >>swapped out and I've also tried to give both foreground and background >>tasks the same amount of time. The second task is the Big Dos window; >>no others tasks are present. >> >>Any clues ? >>-- >>Eelco van Asperen. uucp: evas@cs.eur.nl || asperen@hroeur5.bitnet >>Erasmus University Rotterdam, The Netherlands || no claims - no disclaimers >> Michael Jackson: half Man, half Bambi > >I have had similar problems with DesqView-386 and PC-NFS Telnet as well >as the PC-NFS >drives that I mount. They >well. The problem occurs whenever I try to >in a DesqView window. Everything works fine outside of Desq- >I have tried to isolate the problem by following the procedures given >in the >and this is what I have >3 in the DV window from which I launch telbin.exe. When >the first line appears at the top of the screen > > >Anyone have any ideas on how to run a telnet session under DesqView/386 >with PC-NFS? >telnet window, but that >address corresponding to the shared >card. I do exclude the shared memory region from >config.sys. > You need to exclude the area where your telnet driver resides. Below is a copy of my CONFIG.SYS as well as a copy of the my deskview parameters for NCSA telnet. I have both telnet and a RBBS running simultaneously. It took some trial and error (this isn't an exact science) but I finally got it working. Also I am using a newer version of TELNET which installs the driver directly. If you would like to get a copy of this version of telnet let me know and I will tell you how to retrieve it. /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ Betty Harvey | David Taylor Research Center | Office Automation Systems Branch | Bethesda, Md. 20084-5000 | | (301)227-4901 | /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\\/\/ CONFIG.SYS device=\qemm\qemm.sys ram diskbuf=2 exclude=d000-d2ff files=35 buffers=25 /x device=c:\qemm\loadhi.sys c:\dos\ansi.sys stacks=0,0 NOTE: The diskbuf=2 is required for a SCSI hard drive. Change a Program Program Name............: FTP Keys to Use on Open Menu: FT Memory Size (in K): 480 DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Program...: \ncsa23\telbin.exe Parameters: -s Directory.: \ncsa23 DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Options: Writes text directly to screen.......: [Y] Displays graphics information........: [N] Virtualize text/graphics (Y,N,T).....: [Y] Uses serial ports (Y,N,1,2)..........: [N] Requires floppy diskette.............: [N] Change a Program Advanced Options System Memory (in K).......: 0 Maximum Program Memory Size (in K)..: Script Buffer Size.......: 1000 Maximum Expanded Memory Size (in K): Text Pages: 1 Graphics Pages: 0 Initial Mode: Interrupts: 00 to FF DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Window Position: Maximum Height: 43 Starting Height: 43 Starting Row...: 1 Maximum Width.: 80 Starting Width.: 80 Starting Column: 1 DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Shared Program Pathname..: Data......: DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD Close on exit (Y,N,blank)......: [N] Uses its own colors..............: [Y] Allow Close Window command.....: [Y] Runs in background (Y,N,blank)...: [Y] Uses math coprocessor..........: [Y] Keyboard conflict (0-F)..........: [0] Share CPU when foreground......: [Y] Share EGA when foreground/zoomed.: [Y] Can be swapped out (Y,N,blank).: [ ] Protection level (0-3)...........: [0]