Path: utzoo!attcan!uunet!mcsun!ukc!stl!cel!jc From: jc@cel.co.uk (jerry cullingford) Newsgroups: comp.sys.amiga.hardware Subject: Re: Deskjet printer driver wanted Message-ID: <8178@suns201.cel.co.uk> Date: 28 Jan 91 09:38:28 GMT References: <8147@suns102.cel.co.uk> Reply-To: jc@cel.co.uk (jerry cullingford) Followup-To: comp.sys.amiga.hardware Organization: Crosfield Electronics, Hemel Hempstead, England. Lines: 24 Summary: Expires: Sender: In article ben@epmooch.UUCP (Rev. Ben A. Mesander) writes: >>In article <8147@suns102.cel.co.uk> jc@cel.co.uk (jerry cullingford) writes: >> >> Does anyone know where I can find an HP deskjet(+) printer driver >> that will support graphics dumps bigger than 8x10 inches? I want >> to use professional page for A4 pages, (11 3/4 x 8 1/4) so losing >> the bottom inch and a bit is a real pain! > > I think if you read your LJ/DJ manual, you'll find it's the printer >itself that has this limit in it. > Ok.. The width is a hard limit, but the only limit on height is that you're not supposed to use the bottom 1/2 inch. That means I'm still losing 1 1/4 inch of usable space on an A4 sheet! It can be done.. The dedicated AmigaTeX driver does it fine! -- +-----------------------------------------------------------------+ | | Jerry Cullingford jc@cel.co.uk or jc@crosfield.co.uk | ,-|-- | #include Amiga! 2,000,000+ and counting.... | \_|__ +-----------------------------------------------------------------+ \___/