Path: utzoo!attcan!uunet!cs.utexas.edu!swrinde!ucsd!ucbvax!gnh-applesauce.cts.com!jtam From: jtam@gnh-applesauce.cts.com (Joseph tam) Newsgroups: comp.sys.apple2 Subject: Re: no-slot clock on a //c? Message-ID: Date: 24 Jan 91 06:43:14 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 11 X-Unparsable-Date: Wed Jan 23 91 at 22:08:49 (EDT) I have the //c here with the no-slot clock.. and it seems to work fine.. but i think it also depends on the software you are running.. with some older software that doesn't support Prodos, then you can not use the clock, since you can not patch it to read the clock.. but other than that.. i can't think of any disadvantages.. hope this helps =============================================================================== | Name: Joseph Tam | Tangramayne BBS | | SiteName: gnh-applesauce | 718-454-7490 | | Network address: jtam | 1200+ baud | | UseNet | DDBBS v9.0 soon with FidoNet! | ===============================================================================