Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!cunixf.cc.columbia.edu!cunixb.cc.columbia.edu!stc7 From: stc7@cunixb.cc.columbia.edu (Steven T Chiang) Newsgroups: comp.sys.apple2 Subject: Re: Programming in Assembly Message-ID: <1991Feb10.080013.3245@cunixf.cc.columbia.edu> Date: 10 Feb 91 08:00:13 GMT References: <478@generic.UUCP> Sender: news@cunixf.cc.columbia.edu (The Daily News) Reply-To: stc7@cunixb.cc.columbia.edu (Steven T Chiang) Organization: Columbia University Lines: 28 In article <478@generic.UUCP> ericmcg@pnet91.cts.com (Eric Mcgillicuddy) writes: >Double click on the Basic.System file on your system disk. At the "]" prompt >type "CALL -151" or "mtr". At the "*" prompt, type "!". You are now using the >free monitor included with every Apple II ever sold and the mini-assembler >included with most II's (except the early //c's). Note that it has been >extended to accept the 65816 opcodes. I do not know the commands needed to >actually use the thing, I hink Orca/M is well worth the $50 or so and use that >exclusively. Don't know if I agree with that. Merlin 16+ is definitely faster than Orca M will ever be. It's a little more expensive, $80 through Programs Plus, but well worth it. For that money you get the 5.25" version, the two different 3.5" version, one for ProDOS 8, and the other for GS/OS. It also has the expressload utilities, compact utilities, and all of the things you'd ever need in an assembler. Plus, all of the utilities of ProSel. BTW- I am in no way affiliated with Glen Bredon, or Roger Wagner Publishing. _______________________________________________ _______________ | Steve Chiang Apple //gs Forever! | Coming Soon: | |-----------------------------------------------|---------------| | Columbia University in the Harlem area :P | DreamGrafix: | | Internet : stc7@cunixb.cc.columbia.edu | 3200 color | | America_Online : DWS Steve | power | |_______________________________________________|_______________|