Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!samsung!think.com!paperboy!hsdndev!cmcl2!uupsi!sunic!lth.se!E89DH@rigel.efd.lth.se
From: news@efd.lth.se (USENET News System)
Newsgroups: comp.sys.atari.st.tech
Subject: PC Ditto
Message-ID: <1991Feb7.135808.20128@lth.se>
Date: 7 Feb 91 13:58:08 GMT
Sender: newsuser@lth.se (LTH network news server)
Reply-To: e89dh@rigel.efd.lth.se
Organization: Lund Institute of Technology,Lund, Sweden
Lines: 14

I seem to have a problem installing PC-Ditto on my Megafile30+Mega2ST
system. I have done it earlier at a 20 MB HD and it worked OK, but I just
cant get it to accept that the dos file exists on the megafile30. When I 
start PC-ditto (whith PCDOS 3.2 on the HD) it just locks up! (By the way,
YES I have read the manual (see above) ). I have also used the program
on the PC-Ditto disk to fix the boot block parameters (I know that they
dont say that you should use it on a mega30, but if I dont, I just get
"divide overflow"). My DOS bootdisk contains exactly the same PRG:s and
works perfectly, finding my C,D,E,F partions with no problems. When I
transfer them to my newly formatted HD (First formatted from GEM, then
from PC-ditto with"format C:/S"), nothing works (No, i doesnt transter the
Command.com from the boot disk either!)
Please EMAIL me about this!
David Hultgren