Xref: utzoo comp.sys.dec:4992 comp.sys.dec.micro:1733 misc.wanted:13281
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!spool.mu.edu!samsung!zaphod.mps.ohio-state.edu!lavaca.uh.edu!menudo.uh.edu!lobster!mwk!gleason
From: gleason@mwk.uucp
Newsgroups: comp.sys.dec,comp.sys.dec.micro,misc.wanted
Subject: Need a PRO-350 disk power supply cable
Message-ID: <87.27b27ae3@mwk.uucp>
Date: 8 Feb 91 16:18:11 GMT
Organization: M. W. Kellogg, Houston TX
Lines: 15


  I am installing an RD-53 in my PRO-350, to replace the aging RD-51.
To complete this, I need a longer four wire power cable, since the
one for the RD-51 was barely long enough to reach the old drive, and
the RD-53 has its connector on the other side.

  It looks like an RX-50 power supply cable would do, since it it
the same type of cable, only longer (since the RX-50 is on the
other side of the cabinet). If anyone has one laying around not 
in use, I'd gladly lay a few bucks on 'em for it...

Lee K. Gleason
Control-G Consultants
713/528-1859
gleason@mwk.uucp