Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!ut-emx!emx.utexas.edu
From: everett@emx.utexas.edu (Everett Wang)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Help needed
Message-ID: <43990@ut-emx.uucp>
Date: 11 Feb 91 00:07:11 GMT
Sender: everett@ut-emx.uucp
Distribution: na
Organization: The University of Texas at Austin; Austin, Texas
Lines: 17


	Just after passes warrant period for one month, my micronics computer 
is dead. It was OK yesterday before I turn it off. This moning when I turn it on
it didn't boot up. Intead it beeped four times and did nothing else. Nothing on
the screen. After first beep it pauses 1 second then two beeps without pause 
then it pauses another second before last beep was heard.(bee  beebee  bee).
It did not try to read floppy drive. 

	My 25 mhz 386 computer has a Micronics mother board with 1 mb memery and
32K cache. It has one 1.4 and 1.2 floppy drive and Mitrubishi (sp?) 62 mb fixed
drive. The video board is ATI vga wonder.

	If someone can give me some suggestions I will be appreciated. 

	Thank you very much for help.

	Everett.