Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!maverick.ksu.ksu.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!dmmg1176 From: dmmg1176@uxa.cso.uiuc.edu (David M Marcovitz) Newsgroups: comp.sys.mac.programmer Subject: Re: HyperCard 2.0 Message-ID: <1991Feb8.160258.15102@ux1.cso.uiuc.edu> Date: 8 Feb 91 16:02:58 GMT References: <8277@castle.ed.ac.uk> Sender: news@ux1.cso.uiuc.edu (News) Organization: University of Illinois at Urbana Lines: 21 rgonzal@elbereth.rutgers.edu (Ralph Gonzalez) writes: >Get the message box (choose the Message menu item) and type: >set userlevel to 5 (or whatever) >-Ralph I tried this before I found the "magic" solution, and it didn't work. From a brief glance at the Hypertalk code, I couldn't figure out why it didn't work and "magic" did, but with "set userlevel," several things were not working correctly. "Magic" seemed to clear them up. By the way, the "magic" solution is to go to the last card in the Home stack and type "magic" followed by a . -- David M. Marcovitz | internet: marcovitz@uiuc.edu Computer-based Education Research Lab | dmmg1176@uxa.cso.uiuc.edu University of Illinois | novanet: marco / cca / cerl