Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!ux1.cso.uiuc.edu!uicsl.csl.uiuc.edu!brando
From: brando@uicsl.csl.uiuc.edu (Brandon Brown)
Newsgroups: comp.unix.msdos
Subject: Re: Second hard drive and MS-DOS under Interactive
Message-ID: <1991Feb7.024430.26854@ux1.cso.uiuc.edu>
Date: 7 Feb 91 02:44:30 GMT
References: <2501@enea.se>
Sender: news@ux1.cso.uiuc.edu (News)
Organization: University of Illinois at Urbana
Lines: 30


In comp.unix.msdos you write:

>I have some problems after trying to install Interactive.

>I have tried dossette and vpix and nothing will work.

>Shall I partition with DOS 3.3 or DOS 4 or must I let unix do the 
>dos-partioning ? HELP!

Actually, Interactive works fine. Read the manual, but for now edit your
system (or local) vpix/vpix.cnf file to include:

D:	/dev/rdsk/0p0 to mount drive C: (under dos)  as D: on your system.

If you want to access the DOS partition on the second drive you can use:

/etc/mount -f DOS /dev/dsk/1p1 /drived (of course you need to make /drived)

then you will be able to access it as z:\drived

Hope this helps!


+-----------------------------------------------------------------------------+
|  Brandon Brown                     | Internet: brando@uicsl.csl.uiuc.edu    |
|  Coordinated Science Laboratory    | UUCP:	 uiucuxc!addamax!brando!brown |
|  University of Illinois            | CompuServe: 73040,447                  |
|  Urbana, IL  61801                 | GEnie:    xmg23356, macbrando          |
+-----------------------------------------------------------------------------+