Path: utzoo!censor!comspec!humvax!becker!ncrcan!attcan!uunet!wuarchive!mit-eddie!rutgers!aramis.rutgers.edu!paul.rutgers.edu!chain From: chain@paul.rutgers.edu (Chain Lee) Newsgroups: alt.sources Subject: X11R4 patch for SCO XENIX (part00) Message-ID: Date: 7 Jan 91 02:20:06 GMT Organization: Rutgers Univ., New Brunswick, N.J. Lines: 24 Keywords: for building your own X window on Xenix sysV 386 Next 11 of my postings will be X11R4 patches for SCO Xenix. Load X11R4 source to your system. The top directory should be named X11R4. Apply 18 official patches first. Then load my patches. At the directory where X11R4 resides, run, cat xenix_patch_part?? | patch -p Cd to X11R4/mit/lib/X/sysV, run the following. rm *~ ln Berklib.c .. Then read X11R4/README.XENIX for procedures of building the system. One more thing should be added to step-7 in README.XENIX. Following command should be added at the end of your .xinitrc file to switch VGA screen back to text mode when Xxenix finishes. vidi v80x25 Chain Lee 01/06/91 chain@paul.rutgers.edu