Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!ccu.umanitoba.ca!umcarls9
From: umcarls9@ccu.umanitoba.ca (Charles Carlson)
Newsgroups: comp.dcom.lans
Subject: trouble with WD8003e board
Message-ID: <1991Feb14.233331.28653@ccu.umanitoba.ca>
Date: 14 Feb 91 23:33:31 GMT
Organization: University of Manitoba, Winnipeg, Canada
Lines: 14


 
I'm having a problem with a WD8003e board.  The ram base address seems
to be conflicting with something else.   How do you change the ram base
address in this board?  The manual says through the network software,
I've tried that, and the conflict still exists.  If I run the 
diagnose software, it says the board is at D0000.  I have an ElitePlus/16
board which is also at D0000 and works fine in the same machine.  
The back of the manual says the board is at C4000 which is already in use
in that machine.  How do I tell for sure where the ram base is, and how
do I change it?  

Thanks,
Charles